
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X190-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 190mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X190-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The integrated magnet (-S) directly supports AirTAC CMSE reed and DMSE solid-state sensors fitted into the dual-side barrel grooves.
With a nominal 190mm stroke and a 75mm adjustment range, this SKU yields a usable travel window of 115-190mm. You can fine-tune the retract end-position at commissioning or during product changeovers without swapping the cylinder or adding external stops. The rear adjuster acts purely as a travel stop for deceleration alongside the variable air cushions, meaning it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X190-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 115-190mm travel window during product size changes to set new retract stops without physically swapping cylinders on the line.
Fine-tune the exact retract position at commissioning using the rear adjuster, avoiding the need to bolt on custom external mechanical stops.
Adjust the effective stroke on the fly for assembly lines handling multiple part lengths, utilizing the dual sensor grooves for position feedback.
If your application requires less force, dropping to a 20mm bore yields 345N of pull force, while stepping up to a 40mm bore provides 879N. The 12mm rod and M10x1.25 thread handle basic side loads, but for any stroke over 300mm an external guide is recommended to prevent rod deflection.
Select an adjustable-stroke SAIJ over a fixed SAI when a machine requires frequent end-position tuning for different product sizes. To replace this cylinder, match the 32mm bore, 190mm stroke, PT port, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). For load-holding without live air, use an external rod lock or explore the SAIL or BSAI series instead.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the 190mm nominal stroke down to 115mm, creating a 75mm adjustable window. This stop only sets the travel end and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.