
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X195-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X195-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 185-195mm usable travel window, allowing you to dial back the 195mm nominal stroke by up to 10mm during commissioning.
This extruded aluminum barrel design includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. The carbon steel rod and M10x1.25 thread offer robust performance, while the adjustable stopper lets you fine-tune end positions without adding external stops.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X195-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 185-195mm window during machine commissioning without swapping cylinders.
Quickly adjust the stroke stopper by up to 10mm on a packaging line when handling slightly different product sizes.
The rear adjuster acts strictly as a travel stop and does not hold the load without live air; for fail-safe load holding, consider the SAIL or BSAI series.
As a dimensionally interchangeable ISO 15552 cylinder, it matches standard SAI footprint dimensions and uses a PT tapered port thread. It supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the stroke is under 300mm, side-load concerns are minimal, but external guides are still recommended for heavy lateral loads.
Quick checklist
The rear adjuster screw allows you to shorten the 195mm nominal stroke by up to 10mm, creating a 185-195mm usable travel window. This stopper only sets the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.