
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X195-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X195-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a generous usable travel window of 95 to 195 mm, enabling highly flexible end-position tuning during commissioning without swapping out the physical actuator.
This model incorporates adjustable pneumatic cushions at both ends to manage deceleration across its 30 to 800 mm/s speed range. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of position switches. It supports a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options found on some standard variants.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X195-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 95-195 mm travel window during product size transitions without swapping the actuator or bolting on external stops.
Fine-tune the retract position on the fly to accommodate varying package lengths on a sorting conveyor line.
The 100 mm adjustment range is particularly valuable for product-size changeovers on a packaging line, allowing operators to dial in the exact 95 to 195 mm travel window without adding external mechanical stops.
When specifying a replacement, match the 32 mm bore, 195 mm stroke, 100 mm adjustment, PT G1/8 port, and the required mounting style. Because this is a double-acting cylinder, the rear adjuster functions solely as a travel stop and does not hold the load without live air pressure; for true fail-safe load holding, consider the SAIL or BSAI series. For any stroke of 300 mm or more, an external guide is recommended to manage side loads.
Quick checklist
If operated at 0.7 MPa, the push force increases to 563 N.
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 100 mm, creating a usable travel window of 95 to 195 mm. It is a travel stop, not a lock, and does not hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.