
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X195-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X195-30 is a double-acting ISO 15552 profile cylinder featuring a rear mechanical stroke adjuster. With a nominal 195 mm stroke and a 30 mm adjustment range, it provides a usable travel window of 165 to 195 mm. This allows you to dial in the exact retract position at commissioning without adding external stops.
This extruded aluminum profile barrel includes sensor grooves on both sides for standard CMSE reed and DMSE electronic switches. The carbon steel piston rod features an M10x1.25 thread, and the body uses PT tapered porting. The rear adjuster acts purely as a travel stop and works alongside the variable air cushions to decelerate the load; it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X195-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 165-195 mm window during machine commissioning without swapping out the entire cylinder.
Quickly adjust the retract distance on packaging lines when handling different product sizes, saving setup time between runs.
Select this 32 mm bore model when you need precise retract positioning over a 165 to 195 mm travel window. Conversely, if you need less travel, you can choose a shorter standard SAI fixed-stroke cylinder. Because the stroke here is under 300 mm, side-load stress on the 12 mm rod is manageable without an external guide for typical loads.
Choose the SAIJ adjustable version over a fixed SAI when machine setups require product changeovers or fine-tuning of the end-of-stroke position. For load-holding without continuous air pressure, note that this rear stopper is not a brake—consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead. This model is dimensionally interchangeable per ISO 15552, using a PT port, carbon steel rod, and mounting options limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
It features a rear adjusting screw that lets you shorten the effective stroke by up to 30 mm. This creates a usable travel window of 165 to 195 mm, allowing you to fine-tune the retract end position without changing the cylinder itself.
At the maximum 1.0 MPa, the push force reaches 801 N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.