
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X195-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X195-40 is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 195 mm travel by up to 40 mm. This creates a precise 155-195 mm usable stroke window for fine-tuning end positions at commissioning without swapping hardware. As an extruded aluminum profile cylinder, it is dimensionally interchangeable with ISO 15552 cylinders.
The carbon steel rod features an M10x1.25 thread, and pneumatic connections use a PT tapered G1/8 port. Variable air cushions at both ends manage deceleration, while the integrated sensor grooves on both sides accept CMSE reed or DMSE electronic switches if a magnet is specified later.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X195-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 155-195 mm travel window during product size changes to set new end positions rapidly without machining new hard stops.
Fine-tune the extended stop on the fly to perfectly seat parts, leveraging the 40 mm adjustment range to absorb mechanical tolerances.
Adjust the retract end-position to alter the resting state of a diverter arm, accommodating varying package sizes on the fly.
Choose this 32 mm bore when an application requires precise mechanical end-position tuning during setup or product changeover, avoiding the need for external stops. Because the 195 mm stroke approaches the mid-range of unsupported travel, ensure external guiding is used to prevent rod side-loading.
When specifying a replacement, verify the 195 mm stroke, 40 mm adjustment range, PT G1/8 port, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the rear adjuster acts strictly as a travel stop and does not hold the load without live air; for positive load-holding without pressure, consider an AirTAC SAIL or BSAI cylinder.
Quick checklist
At the maximum 1.0 MPa pressure, it achieves 82 kgf of push force.
The rear adjuster screw lets you shorten the effective travel from the nominal 195 mm down to 155 mm. This stopper only sets the end position; it does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.