
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X195-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X195-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 120 to 195 mm, allowing you to dial back the nominal 195 mm stroke by up to 75 mm during commissioning.
This model uses a 12 mm carbon steel rod with an M10x1.25 thread, sized to carry moderate side loads, though long unsupported strokes still require an external guide. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of AirTAC CMSE reed or DMSE electronic solid-state switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X195-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 120-195 mm window during machine setup to perfect product placement without changing hardware.
Quickly adapt the stroke length on packaging lines when switching to a different sized item, using the 75 mm adjustment range to vary the end stop.
Choose this adjustable-stroke model when you need variable end-position tuning or product-size changeover without swapping the entire cylinder or bolting on external stops. For a fixed travel length without the need for end-tuning, the standard SAI cylinder is a simpler alternative.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 195 mm stroke, 75 mm adjustment range, PT tapered port thread, and the chosen mounting kit. Because the 195 mm stroke approaches the mid-range of supported travel, ensure your mounting configuration adequately supports the load. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series.
Quick checklist
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the nominal 195 mm down to as little as 120 mm. It is a travel stop, not a lock, so the cylinder requires live air to hold its position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.