
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X20-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 20mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X20-10-S is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster. It provides a usable travel window of 10-20 mm, letting you dial back the 20 mm nominal stroke by up to 10 mm during machine setup. This variant includes a standard magnet for position sensing and uses PT tapered port threads.
The rear adjustment screw acts purely as a mechanical stop to set the retract end-position accurately without swapping cylinders. It does not hold the load without live air pressure. The extruded aluminum barrel features sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X20-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Perfect for precisely dialing in a 10-20 mm travel window during machine commissioning without replacing the cylinder or adding external stops.
Quickly adjust the retract end-position by up to 10 mm when switching between slightly different product sizes on a high-speed line.
Equipped with a standard magnet and dual sensor grooves to easily integrate CMSE or DMSE switches for end-of-stroke confirmation.
If your application requires less force, stepping down is not an option since 32 mm is the smallest SAIJ size. An adjustable stroke is ideal for product changeovers where the exact retract position varies slightly, saving you from machining external stops or buying a fixed-stroke SAI cylinder.
For load-holding without continuous air pressure, this cylinder is insufficient because the rear adjuster is a travel stop, not a lock. You would need an SAIL pneumatic lock or a BSAI clamp-lock cylinder instead. As an ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders. To match this exact replacement, specify a 32 mm bore, 20 mm stroke, 10 mm adjustment, PT G1/8 port, and the -S magnet option.
Quick checklist
It has a rear adjusting screw that lets you shorten the effective stroke by up to 10 mm. This creates a usable travel window of 10-20 mm, allowing fine-tuning of the end position at commissioning without external stops.
The maximum push force is 724 N at 0.9 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.