
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X200-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
It features a 12mm carbon steel piston rod and a PT G1/8 port. By turning the rear screw, you can trim the effective travel into a precise 190-200mm window without adding external stops.
This adjustable stopper allows fine end-position tuning during commissioning or product changeover. Unlike a true locking cylinder, the adjuster only sets the travel end and will not hold the load without live air. For position holding, consider the SAIL or BSAI series. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 190-200mm retract stop during product size transitions without swapping the cylinder or bolting on external physical stops.
Use the rear adjuster to fine-tune the exact end-of-stroke position during initial machine setup, absorbing mechanical tolerances instantly.
Choose this 32mm bore when an application requires a 200mm stroke that needs exact 190-200mm end-stop calibration. The 12mm rod and M10x1.25 thread handle moderate side loads, though a 200mm stroke still benefits from an external guide. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, omitting FB and CA options. To match this ISO 15552 cylinder, specify the 32mm bore, 200mm stroke, 10mm adjustment, PT G1/8 port, and carbon steel rod.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster acts as a stopper that shortens the 200mm nominal stroke by up to 10mm, creating a 190-200mm usable travel window. It requires live air to function and does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.