
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X200-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X200-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that permits an effective travel window of 100 to 200 mm. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE and DMSE switches, though a magnet is not included with this base configuration.
This model utilizes a PT tapered port thread (G1/8) and relies on variable air cushions at both ends to decelerate the load. The rear stopper screw is strictly a travel end-stop, meaning it cannot hold a load dynamically without live air pressure. For applications requiring fail-safe load holding, you must pivot to a SAIL or BSAI variant.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the stroke from 200 mm down to 100 mm instantly when switching to a shorter package format on the packaging line.
Fine-tune the retract end-position during initial commissioning without physically swapping out the actuator.
Accommodate multiple part sizes on a single fixture by adjusting the travel window rather than retooling the entire station.
Choose this 32 mm bore when a compact actuator is needed but the exact end-position requires on-the-fly tuning during commissioning or product changeover. Conversely, if you need a fixed end-stop and want to eliminate the adjustment mechanism entirely, the standard SAI version is the better choice.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 200 mm nominal stroke, 100 mm adjustment range, PT port thread, and Basic/FA/LB/TC/FTC/TCM1/TCM2 mounting interface. Because the nominal stroke is 200 mm, side-load risks are moderate, but long unsupported strokes still necessitate an external guide to prevent rod binding.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that shortens the retract stroke by up to 100 mm. This creates a usable travel window between 100 mm and 200 mm, allowing precise end-position tuning without changing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.