verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-100S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X200-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke200 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$74.20 $81.70Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-100S

The AirTAC SAIJ32X200-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The integrated magnet allows seamless operation with CMSE reed and DMSE electronic sensors fitted into the dual-side barrel grooves.

This specific SKU provides a generous 100mm adjustment range, transforming the 200mm nominal stroke into a highly flexible 100-200mm usable travel window. It utilizes a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting heavy pivot options to suit compact changeover applications.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-100S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X200-100S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke200 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-100S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-100S Is Used

settings_input_component

Adjustable Machine Stops

Dial in the exact 100-200mm end-stop position during product changeovers without adding external physical stops to the machine frame.

precision_manufacturing

Component Positioning

Fine-tune the retraction end-point at commissioning to accommodate varying material thicknesses or tooling offsets on the fly.

tune

Sensor Calibration Setup

Leverage the -S magnet and dual sensor grooves to mount CMSE or DMSE switches precisely where needed within the adjusted travel window.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-100S the Right Cylinder?

Choose this 32mm bore when you need precise end-position tuning during commissioning without swapping physical cylinders, contrasting with a fixed-stroke SAI model. Because the 200mm stroke exceeds 300mm? No, but for longer unsupported travels, always guide the load externally to protect the rod from side-load wear.

When specifying an ISO 15552 replacement, match the 32mm bore, 200mm nominal stroke, 100mm adjuster, PT G1/8 port thread, and the -S magnet requirement. Remember that the rear adjuster acts only as a travel stop for deceleration; it does not hold the load without live air pressure. For true load-holding without continuous air, select an AirTAC SAIL or BSAI cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-100S FAQ

The rear adjuster screw acts as a mechanical stopper that lets you trim the effective travel back by up to 100mm. This turns the 200mm nominal stroke into a 100-200mm usable window, allowing precise end-position tuning at commissioning without replacing the cylinder.

At the maximum 1.0MPa pressure, the push force reaches 724N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-100S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X200-100S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.