verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-10S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X200-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke200 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$74.20 $81.70Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-10S

The AirTAC SAIJ32X200-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a 190-200 mm usable travel window by allowing you to trim the nominal 200 mm stroke back by up to 10 mm.

This unit features a standard carbon steel rod and a PT tapered port thread. It includes a -S magnet for position sensing, working seamlessly with AirTAC CMSE reed and DMSE electronic solid-state switches mounted into the dual-side sensor grooves. The extruded aluminum barrel design integrates variable air cushions at both ends to manage end-of-stroke deceleration.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-10S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X200-10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke200 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-10S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-10S Is Used

tune

Machine Changeover

Dial in the exact 190-200 mm end-stop during product size changes without physically replacing the cylinder or adding external shims.

settings_input_component

Sensor-Verified Setup

Uses the integrated -S magnet with CMSE reed or DMSE electronic switches to confirm end-of-stroke positions after an adjustment is made.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-10S the Right Cylinder?

The 10 mm rear adjuster is ideal for fine-tuning the travel end during commissioning or product changeovers without swapping the physical cylinder or adding external stops.

For ISO 15552 dimensional interchangeability, match the 32 mm bore, 200 mm stroke, 10 mm adjustment range, PT port thread, and -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting the FB, CA, CB, and CR styles. Because the nominal stroke is 200 mm, external guiding is recommended to prevent excessive rod side-loading. Note that the rear adjuster and air cushions act as travel stops and deceleration devices, not locks; for load-holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-10S FAQ

At 0.7 MPa, the push force increases to 563 N.

The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the 200 mm nominal stroke down to a minimum of 190 mm. This creates a 190-200 mm usable window for fine-tuning the end position at commissioning.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-10S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X200-10S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.