
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X200-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X200-40-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 200 mm stroke with a 40 mm adjustment range, yielding a usable travel window of 160 to 200 mm.
This model includes a magnet for CMSE reed and DMSE electronic sensors, fitting neatly into the extruded aluminum barrel sensor grooves on both sides. It uses a PT tapered G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. The rear adjuster acts purely as a travel stop and works alongside the standard air cushions to decelerate the end of travel; it does not lock or hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 160 to 200 mm travel window during packaging line format changes to accommodate varying carton sizes without replacing the cylinder.
Fine-tune the retract end-position at commissioning using the rear stopper, eliminating the need to bolt on external physical stops.
The 40 mm adjustable window is ideal for product changeovers, allowing you to dial in the exact 160 to 200 mm travel distance without mechanical rework. For load-holding without continuous air pressure, this cylinder is insufficient, and you should look to the SAIL or BSAI series instead.
When matching this ISO 15552 cylinder for a replacement, verify the 32 mm bore, 200 mm stroke, 40 mm adjustment range, PT G1/8 port thread, and the -S magnet option. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR. Because the stroke is 200 mm, ensure the 12 mm rod and M10x1.25 thread are supported by an external guide to prevent excessive side-loading.
Quick checklist
It features a rear adjusting screw that allows you to shorten the effective travel by up to 40 mm. This creates a usable stroke window of 160 to 200 mm, enabling fine-tuning of the retract end position without changing the cylinder.
The maximum thrust is 82 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.