
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X200-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X200-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 200 mm stroke that can be dialed back by up to 50 mm, creating a precise 150-200 mm usable travel window for commissioning flexibility.
Because it is a profile cylinder, the extruded aluminum barrel features sensor grooves on both sides for CMSE reed and DMSE electronic switches. The rear adjuster acts purely as a travel stop to set end positions without adding external stops, but it is not a load-holding lock. The PT tapered port threads match the G1/8 air supply requirement for this bore size.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X200-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 150-200 mm retract position during initial commissioning without swapping out physical cylinders.
Quickly adjust the end-stop to accommodate different part sizes on a modular assembly line.
Trim back the nominal 200 mm stroke by up to 50 mm to perfect the motion sequence of a light-duty mechanism.
Choose this adjustable model when a fixed-stroke SAI cylinder cannot accommodate product changeovers or fine-tuning at machine setup. The 50 mm adjustment range lets you shift the retract end-position on the fly. If your application requires slightly less thrust, stepping down is not an option from 32 mm (the smallest bore), but if you need more force, a 40 mm bore provides 628 N at 0.5 MPa.
Since the 200 mm stroke is relatively long for a 32 mm bore, the 12 mm rod and M10x1.25 thread mean you should use an external guide to prevent side-loading damage on unsupported loads. To replace an ISO 15552 cylinder, match the 32 mm bore, 200 mm stroke, 50 mm adjustment, PT G1/8 port, and the -S magnet. Remember that the SAIJ mounting set omits FB, CA, CB, and CR options, offering Basic, FA, LB, TC, FTC, TCM1, and TCM2. For load-holding without live air, consider an AirTAC SAIL or BSAI cylinder instead of relying on the stopper.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw allows you to shorten the effective travel from the 200 mm nominal stroke down to 150 mm. It acts as a mechanical stop to fine-tune the end position, but it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.