
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X210-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position. It provides a usable travel window of 200-210mm, letting you dial back the 210mm nominal stroke by up to 10mm during commissioning without adding external stops.
This model features a 12mm carbon steel piston rod with an M10x1.25 thread, suited for moderate side loads, and uses a PT tapered G1/8 port. It includes variable air cushions at both ends (27mm stroke absorption) to decelerate the load smoothly. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 200-210mm end position during setup to perfect a new assembly process without machining new hard stops.
Quickly adapt the cylinder's travel limit on a packaging line when switching to a different carton size.
Use the 10mm rear stopper to micro-adjust the clamping depth on a workholding fixture for varying part tolerances.
The adjustable stroke is ideal for machine changeovers where the exact end-of-stroke position varies slightly by product size, replacing the need to physically swap a fixed-stroke SAI cylinder. When replacing an ISO 15552 cylinder, match the 32mm bore, 210mm stroke, 10mm adjustment, PT G1/8 port, and the required mounting accessory from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 210mm stroke is under 300mm, a standard external guide is not strictly required for side loads, though the 12mm rod handles typical moderate offsets well.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the 210mm nominal stroke down to 200mm. It functions as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.