
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X210-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 210 mm stroke but includes a 20 mm adjustment screw, creating a 190-210 mm usable travel window for precise end-position tuning at commissioning.
This model uses a carbon steel piston rod with an M10x1.25 thread and a PT tapered G1/8 port. The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets found on some standard ISO cylinders.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 190-210 mm travel window during product size changes without swapping the cylinder or adding external stopper blocks.
Fine-tune the retract end position during commissioning to compensate for mechanical tolerances in light-duty assembly fixtures.
Adjust the stroke limit on the fly for sorting or diverting applications that require slightly different travel distances.
If your application requires less force, stepping down is an option, but if you need higher thrust, consider the 40 mm bore which provides 879 N at 0.7 MPa.
The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series. To replace an ISO 15552 cylinder, match the 32 mm bore, 210 mm stroke, 20 mm adjustment, PT G1/8 port, and required mounting bracket.
Quick checklist
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm, providing a usable travel window of 190 to 210 mm. This stopper only sets the travel end and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.