
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X210-20-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 210 mm stroke that can be fine-tuned down by up to 20 mm, creating a precise 190-210 mm usable travel window.
This variant includes a magnet for position sensing with CMSE reed or DMSE electronic switches and features a PT tapered port. The extruded aluminum barrel includes sensor grooves on both sides. Unlike fixed-stroke SAI units, this rear screw stopper allows you to trim the retract end-position at commissioning without adding external stops. Remember that the adjuster acts only as a travel stop, not a load lock; use a SAIL or BSAI cylinder if you need to hold position without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 190-210 mm retract position during product size changes without physically swapping the cylinder or repositioning hard stops.
Adjust the stroke length on the fly for conveyor sorting arms that handle varying package sizes and require exact reach.
The 12 mm carbon steel rod and M10x1.25 thread offer standard side-load capacity, but because the stroke is 210 mm, ensure you use an external guide to prevent rod binding. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. To match this ISO 15552 interchangeable cylinder, specify: 32 mm bore, 210 mm stroke, 20 mm adjustment, PT port, and the -S magnet.
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw allows you to shorten the effective stroke by up to 20 mm from the nominal 210 mm, providing a usable travel window of 190-210 mm. This stopper only limits the travel end and does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.