verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-30S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke210 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$76.27 $83.77Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-30S

The AirTAC SAIJ32X210-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 180 to 210 mm. The integrated -S magnet allows precise position detection using CMSE reed and DMSE solid-state sensors.

This adjustable model lets you fine-tune the retract end position during commissioning without swapping out the cylinder. The rear adjuster acts purely as a mechanical travel stop and does not hold the load without live air pressure. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-30S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X210-30S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke210 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-30S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×210Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-30S Is Used

precision_manufacturing

Machine Setup Tuning

Dial in the exact 180 to 210 mm retract position during initial machine commissioning without machining new stop blocks.

view_module

Product Changeover

Quickly adjust the end-stop by up to 30 mm on a packaging line when switching to a slightly different product size.

conveyor_belt

Variable End Stops

Fine-tune the pusher travel on a conveyor system to accommodate varying package dimensions on the fly.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-30S the Right Cylinder?

If you need higher thrust, stepping up to the 40 mm bore yields 628 N. The 30 mm adjustment range is perfect for product changeovers, allowing you to dial in the exact end position without adding external stops. For fixed travel, use the standard SAI cylinder. To hold a load without live air, select the SAIL or BSAI series.

Because the 210 mm stroke exceeds 300 mm is false here, but note that long unsupported strokes still need an external guide to prevent side-loading. The M10x1.25 rod thread handles moderate side loads well. When replacing an ISO 15552 cylinder, match the 32 mm bore, 210 mm stroke, 30 mm adjust, PT port, and -S magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-30S FAQ

The maximum thrust is 82 kgf at 1.0 MPa.

The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from 210 mm down to 180 mm. It sets the end position but does not lock or hold the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-30S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X210-30S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.