
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X210-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 40 mm. This creates a usable 170-210 mm adjustable stroke window, ideal for fine-tuning end positions at commissioning without swapping the cylinder or bolting on external stops.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches, though this specific SKU is configured without a magnet. It uses a standard carbon steel piston rod with an M10x1.25 thread and a PT tapered port. The rear adjuster acts purely as a mechanical travel stop to set the deceleration point alongside the built-in air cushions; it does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 170-210 mm end position during commissioning without machining external stoppers or changing the cylinder.
Quickly adapt the cylinder stroke on packaging lines when product dimensions change, using the 40 mm rear adjustment screw.
If your setup needs greater thrust, stepping up to the 40 mm bore SAIJ variant increases the 0.5 MPa push force to 628 N. The adjustable stroke is specifically beneficial for machine setups requiring variable end stops or product-size changeovers on a line, offering more flexibility than a fixed-stroke SAI cylinder.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 210 mm nominal stroke, 40 mm adjustment range, PT port thread, and standard carbon steel rod. Because the nominal stroke is 210 mm, ensure your mounting arrangement supports the rod adequately to prevent excessive side-loading. For applications requiring true position holding without continuous air pressure, this standard cylinder is insufficient; consider the AirTAC SAIL or BSAI series instead. Available mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
At 0.9 MPa, the push force increases to 724 N.
The rear adjuster screw allows you to shorten the 210 mm nominal stroke by up to 40 mm, creating a 170-210 mm usable travel window. This adjuster acts as a travel stop for end-position tuning and is not a lock; the cylinder requires live air pressure to hold its load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.