
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X210-50 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that creates a usable travel window of 160 to 210 mm.
The carbon steel rod and M10x1.25 thread are suited for lighter loads, and the extruded aluminum barrel includes sensor grooves on both sides for flexible mounting. This model uses a PT tapered port (G1/8) and supports a speed range of 30-800 mm/s, making it highly versatile for dynamic applications.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 160 to 210 mm end position during product size changes without replacing the cylinder or adding external mechanical stops.
Fine-tune the retract stroke during commissioning to absorb mechanical tolerances, utilizing the 30-800 mm/s speed range for rapid cycling.
The 50 mm adjustment range is ideal for product-size changeovers on a packaging line, letting you fine-tune the retract end-position at commissioning rather than swapping out a fixed-stroke SAI cylinder. Because the 210 mm stroke exceeds 300 mm is false here, standard guiding applies, but always ensure the M10 rod handles the expected side loads.
For direct replacement matching, ensure your setup uses the PT tapered port, the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), and no -S magnet. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for load-holding, consider the SAIL or BSAI series.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 50 mm, providing a usable travel window of 160 to 210 mm. It acts as a mechanical stop to fine-tune the end position and does not lock the load without continuous air pressure.
It uses a G1/8 PT tapered port and a 12 mm carbon steel rod.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.