verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-50S

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke210 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$76.27 $83.77Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-50S

The AirTAC SAIJ32X210-50-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 160 to 210 mm. The integrated magnet supports position sensing using AirTAC CMSE reed or DMSE electronic switches.

This adjustable-stroke design allows you to fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops. The rear screw acts purely as a travel stop for deceleration alongside the standard air cushions; it is not a locking device and will not hold a load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides, and mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-50S Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X210-50S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke210 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-50S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×210Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-50S Is Used

tune

Product Changeovers

Dial in the exact 160 to 210 mm retract distance on packaging lines when switching between different container sizes without changing hardware.

precision_manufacturing

End-Position Tuning

Fine-tune the final retract position during machine commissioning to perfect alignment and avoid mechanical hard stops.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-50S the Right Cylinder?

An adjustable stroke is preferred over a fixed SAI model for machine setups that handle product changeovers, allowing operators to dial in the exact retract distance on the fly. Because the stroke is 210 mm, ensure adequate external guiding to prevent excessive side-loading on the M10x1.25 carbon steel rod.

For a direct ISO 15552 replacement match, verify the 32 mm bore, 210 mm nominal stroke, 50 mm adjustment range, PT tapered port threads, and the -S magnet option. Remember that the rear adjuster only sets the travel limit; for load-holding without live air pressure, consider an AirTAC SAIL or BSAI cylinder instead.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-50S FAQ

The rear adjuster screw allows you to shorten the effective stroke by up to 50 mm, creating a usable travel window of 160 to 210 mm. This stopper fine-tunes the end position but does not lock the load without continuous air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-50S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X210-50S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.