
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X210-75 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down from a 210 mm nominal stroke to a 135 mm minimum. This creates a highly flexible 75 mm usable travel window for dialing in exact end positions during commissioning.
The carbon steel piston rod uses an M10x1.25 thread, and the body features PT tapered port threading with a G1/8 air supply connection. It includes variable air cushions at both ends to manage deceleration. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly dial the stroke from 210 mm down to 135 mm when switching the line to a shorter product format, eliminating the need to physically swap cylinders.
Use the 75 mm rear adjustment window to fine-tune the exact retract end-position during initial machine setup without adding external mechanical stops.
Choose this 32 mm bore model when your application requires a 135 to 210 mm stroke range but exact end-of-travel positioning must be set during machine commissioning or product changeover. If your process needs less than 135 mm of travel, stepping down to a smaller standard SAIJ stroke avoids over-compressing the adjuster.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 210 mm stroke, 75 mm adjustment range, PT port thread, and mounting style. SAIJ supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts. Because the stroke exceeds 300 mm on larger variants, note that long unsupported strokes require an external guide to prevent rod side-loading, though this 210 mm unit is below that threshold.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from the 210 mm nominal stroke down to 135 mm. This stopper only sets the end position and deceleration; it does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.