verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-10

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X220-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke220 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$73.47 $80.97Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-10

The AirTAC SAIJ32X220-10 is a double-acting ISO 15552 profile cylinder with a rear stroke adjuster, designed to fine-tune end positions during commissioning. It features a 12mm carbon steel rod and a PT G1/8 port. The built-in adjuster provides a usable travel window of 210-220mm, letting you dial back the 220mm nominal stroke by up to 10mm without swapping the unit.

The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-10 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X220-10
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke220 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-10

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×220Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-10 Is Used

settings_input_component

Machine Changeover

Dial in the 210-220mm travel window during product size changes without machining new hard stops.

tune

Commissioning Calibration

Fine-tune the retract end-position by up to 10mm to clear mechanical obstructions during initial setup.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-10 the Right Cylinder?

Choose this adjustable-stroke model when a standard fixed-stroke SAI cylinder cannot accommodate minor mechanical variations or product changeovers. The 10mm adjustment window allows precise end-stop tuning on the machine.

Since the 220mm stroke exceeds the standard 200mm catalog range, it is supplied as a made-to-order non-standard stroke. At 220mm of travel, the 12mm rod requires external guidance to prevent excessive side-loading. The rear screw stop is not a lock; for load-holding without live air, select an SAIL or BSAI cylinder. This unit is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2).

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-10 FAQ

A rear adjusting screw lets you shorten the 220mm nominal stroke by up to 10mm, creating a 210-220mm usable travel window. This stopper sets the end position but does not lock or hold the load without continuous air pressure.

At 0.7MPa, the push force increases to 563N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-10

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X220-10 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.