
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X220-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X220-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the retract end position. With a 220mm nominal stroke and a 30mm adjustment range, it provides a usable travel window of 190-220mm. This built-in adjustability allows for precise end-position tuning during commissioning without adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE or DMSE switches. It supports a speed of 30-800mm/s and uses a PT tapered port. The rear adjuster functions strictly as a travel stop to set deceleration, not as a lock, meaning it will not hold a load without live air pressure. For secure load-holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 190-220mm window during initial commissioning without fabricating custom external stopper blocks.
Quickly adapt the stroke end-position on a packaging line when product dimensions change, using the 30mm rear adjuster to vary the travel limit.
If you need higher thrust, stepping up to the 40mm bore yields 628N. The 30mm adjustment window is ideal for product changeovers on a line, allowing you to dial in the exact retract distance without swapping the cylinder. Because the stroke is 220mm, the 12mm rod should be guided to prevent excessive side-loading on long unsupported travels.
As a true ISO 15552 profile cylinder, this model is dimensionally interchangeable with other ISO 15552 cylinders. When matching replacement specifications, verify the 220mm stroke, 30mm adjustment, PT port thread, and the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). This unit uses a standard carbon steel rod and does not include a magnet for sensors.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 30mm. This creates a usable travel window of 190-220mm from the 220mm nominal stroke, allowing precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.