
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X220-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X220-30-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 220 mm stroke that can be dialed back by up to 30 mm, yielding a precise 190-220 mm usable travel window for exact end-position tuning at commissioning. The extruded aluminum barrel includes sensor grooves on both sides to support position feedback.
Because this is an -S variant, it contains a magnet compatible with AirTAC CMSE reed and DMSE electronic solid-state switches. The rear adjuster acts purely as a mechanical stop to set the retract end-position and relies on the integrated air cushions for deceleration; it does not hold the load without live air pressure. For applications requiring true load-holding without continuous pressure, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 190-220 mm travel window during product size transitions without swapping out the entire cylinder assembly.
Use the rear 30 mm adjuster to compensate for mechanical tolerance stack-up and set the exact retract distance on the line.
The 30 mm adjustment range is ideal for machine setups where you need a variable end-stop or fine-tuning during product changeover without physically swapping cylinders or adding external stopper blocks. It shares the standard ISO 15552 mounting dimensions, but the SAIJ mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
When ordering a replacement, confirm the 32 mm bore, 220 mm nominal stroke, 30 mm adjustment range, PT port thread, and the -S magnet requirement. Since the stroke is 220 mm, ensure your setup manages side loads; the 12 mm rod and M10x1.25 thread handle moderate stress, but long unsupported strokes still require an external guide to prevent premature seal wear.
Quick checklist
The maximum thrust is 82 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 220 mm nominal stroke by up to 30 mm, providing a usable travel window of 190-220 mm. It sets the end position but does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.