
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X220-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X220-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, ensuring precise alignment when fitting CMSE reed or DMSE electronic switches.
With a 220mm nominal stroke and a 40mm adjustment range, this model provides a usable travel window of 180-220mm. This allows you to fine-tune the retract end position at commissioning without adding external stops. The carbon steel rod has an M10x1.25 thread, and the standard PT tapered port is G1/8.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 180-220mm window during commissioning without swapping cylinders or adding external mechanical stops.
Quickly adjust the end-stop by up to 40mm to accommodate varying package lengths on a packaging line.
The adjustable stroke is ideal for machine setups requiring variable end-stops or product-size changeovers, unlike a fixed-stroke SAI cylinder. For strokes of 300mm or more, external guides are recommended to handle side loads.
This cylinder is dimensionally interchangeable with ISO 15552 mounting interfaces and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB/CA/CB/CR options. Note that the rear adjuster is a travel stop, not a lock; it cannot hold a load without live air. For load-holding without pressure, consider the SAIL or BSAI series.
Quick checklist
At 0.7 MPa, the push force increases to 563N.
The rear adjuster acts as a mechanical stop that lets you shorten the effective travel from the 220mm nominal stroke down to 180mm. It sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.