
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X220-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X220-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 32 mm bore and a 220 mm nominal stroke that can be fine-tuned down by up to 50 mm, providing a usable travel window of 170-220 mm. This adjustment capability allows operators to dial in exact end positions during commissioning or product changeovers without swapping out the entire unit.
This model features a carbon steel piston rod and PT tapered port threads (G1/8). It utilizes variable air cushions at both ends to decelerate the load smoothly. The rear adjuster acts purely as a travel stop to set the retraction end-point, not as a locking device, meaning it cannot hold a load without live air pressure. For position-holding requirements, an external rod lock or a related SAIL pneumatic lock cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 170-220 mm retraction stop on packaging lines when switching to different carton lengths, avoiding mechanical rebuilds.
Adjust the stroke on the fly for diverter gates on a conveyor system, accommodating varying product widths without changing the cylinder.
The adjustable stroke is ideal for machine setups that undergo frequent product size changeovers, replacing the need to maintain an inventory of multiple fixed-stroke SAI cylinders.
When integrating this ISO 15552 profile cylinder, note that it supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles. Because the 220 mm stroke is relatively long for the compact 32 mm bore and 12 mm rod, external guidance is recommended to prevent excessive side-loading on the rod seals. This configuration uses standard carbon steel rod material, PT ports, and no magnet, operating at speeds between 30-800 mm/s.
Quick checklist
The rear adjuster allows you to shorten the effective stroke by up to 50 mm, creating a usable travel window of 170-220 mm. It acts as a mechanical stop to fine-tune the retraction end position at commissioning, but it is not a lock and cannot hold a load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.