
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X225-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster that allows you to trim the effective travel back by up to 100 mm. This creates a usable stroke window of 125 to 225 mm, letting you fine-tune the retract end-position at commissioning without adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE and DMSE switches, though this specific configuration omits the magnet. The 12 mm carbon steel rod and M10x1.25 thread provide a robust interface for standard loads, while the PT tapered port ensures a tight pneumatic connection. It features variable air cushions at both ends with a 27 mm cushion stroke to manage impact energy.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the retract position within the 125-225 mm window during product size transitions without swapping out the entire cylinder.
Use the 100 mm rear adjustment screw to precisely set the end-of-stroke stopping point during initial equipment setup.
Accommodate multiple part sizes on a single fixture by adjusting the effective stroke to match each specific component.
Choose this adjustable-stroke model when your machine setup requires variable end-stops or frequent product-size changeovers that a fixed-stroke SAI cylinder cannot accommodate. If your application demands greater thrust, stepping up to the 40 mm bore yields 528 N of pull force at 0.5 MPa. The SAIJ mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR variants.
Because the 225 mm stroke exceeds 200 mm, ensure an external guide supports the load to prevent excessive side-loading on the 12 mm rod. Remember that the rear adjuster functions purely as a travel stop and does not hold the load without live air; for true load-holding without pressure, consider the SAIL or BSAI series, or an external rod lock.
Quick checklist
The rear adjuster acts as an external stopper that shortens the effective travel by up to 100 mm, providing a usable stroke range of 125 to 225 mm. It sets the travel end and deceleration but does not lock or hold the load without continuous air pressure.
The standard operating speed range for this bore size is 30-800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.