
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X225-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 225 mm stroke that can be dialed back by up to 100 mm, yielding a highly flexible 125-225 mm usable travel window for precise end-position tuning during commissioning. Equipped with a -S magnet, it integrates seamlessly with AirTAC CMSE reed and DMSE solid-state sensors via the dual-side extruded barrel grooves.
The rear adjustment screw acts purely as a mechanical stop to set the retract end position and relies on the integrated air cushions for deceleration; it does not lock or hold the load without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-stop position during product size changes on a packaging line, utilizing the 125-225 mm travel window to adapt instantly without changing hardware.
Perfectly align tooling at initial setup by trimming the stroke back in millimeters, avoiding the need to add external mechanical stops or spacer blocks.
Set precise retract distances for light-duty assembly tasks, using the rear stopper to define the exact end-of-stroke location for sensitive components.
Choose this adjustable-stroke model when your machine setup requires variable end stops or frequent product-size changeovers without physically swapping out the entire cylinder. The generous 100 mm adjustment range allows you to trim the travel window down to 125 mm on the fly, a major advantage over a fixed-stroke SAI cylinder. If your application demands load-holding without live air pressure, this cylinder is not suitable; you should instead look at the SAIL or BSAI locking cylinder series.
When specifying a replacement, ensure you match the 32 mm bore, 225 mm nominal stroke, 100 mm adjustment range, PT tapered port thread, and the -S magnet option. Because the 225 mm stroke is relatively long for a 32 mm rod, always use an external guide to prevent excessive side-load wear, and remember the SAIJ mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjusting screw acts as a mechanical stopper that lets you shorten the effective stroke by up to 100 mm, creating a usable travel window of 125 to 225 mm. It sets the end position but does not lock the load without live air pressure.
At its maximum 1.0 MPa pressure, the push force reaches 82 kgf.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.