
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X225-10-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for position detection.
Equipped with a 12mm carbon steel rod and an M10x1.25 thread, this 32mm bore unit handles moderate side loads while operating at speeds of 30-800mm/s. It uses a PT tapered port and offers variable air cushions at both ends to decelerate the load smoothly. The rear adjuster functions purely as a travel stop, so live air pressure is required to hold the load in place.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 215-225mm window during machine commissioning without swapping out physical hardware.
Quickly adapt the cylinder's effective stroke on automated lines when running different product sizes or thicknesses.
Choose this adjustable-stroke model when your machine setup requires precise end-position tuning during commissioning or product changeovers, avoiding the need to physically swap out a fixed-stroke SAI cylinder. Conversely, if you need less force and a shorter travel window, a 32mm bore with a smaller adjustment code may be more appropriate.
Because this is a 225mm stroke, ensure adequate guiding for any long unsupported loads to prevent rod bending. To replace an ISO 15552 cylinder, match the 32mm bore, 225mm stroke, 10mm adjustment, PT port, and the -S magnet. Note that the SAIJ mounting set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. For load-holding without live air pressure, consider an SAIL or BSAI cylinder instead, as the rear adjuster is not a lock.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the 225mm nominal stroke by up to 10mm, creating a 215-225mm usable travel window. It is a travel stop for end-position tuning, not a lock, and the cylinder requires live air to hold its load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.