verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke225 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$73.47 $80.97Save 9% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-20

The AirTAC SAIJ32X225-20 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 225mm stroke with an integrated 20mm adjustment screw, creating a usable travel window of 205-225mm. This allows precise end-position tuning at commissioning without adding external stops.

The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. If position feedback is needed, adding a magnet allows the use of AirTAC CMSE reed or DMSE solid-state sensors. The carbon steel rod features an M10x1.25 thread and a 12mm diameter, providing adequate stiffness for standard loads. Remember that the rear adjuster acts only as a travel stop and does not hold the load without live air pressure.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X225-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke225 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×225Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-20 Is Used

tune

Machine Changeover

Dial in the 205-225mm travel window during product size changes to set new end positions rapidly without swapping cylinders.

settings_input_component

Variable End-Stops

Use the rear adjusting screw to fine-tune the retract position during commissioning, eliminating the need for external mechanical stops.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-20 the Right Cylinder?

The adjustable 205-225mm travel window is ideal for machines requiring variable end-stops or frequent product changeovers, offering more flexibility than a fixed-stroke SAI cylinder. Since the stroke is 225mm, ensure adequate guidance to prevent excessive side-loading on the rod.

For an exact ISO 15552 replacement, match the 32mm bore, 225mm stroke, 20mm adjustment range, PT tapered port threads, and standard carbon steel rod material. Note that SAIJ supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR mounts. Because this is a standard configuration without a magnet, it will not work with proximity sensors out of the box.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-20 FAQ

It features a rear adjusting screw that lets you shorten the effective stroke by up to 20mm, providing a usable travel window of 205-225mm. The adjuster acts as a mechanical stop for end-position tuning and does not lock or hold the load without continuous air pressure.

At 0.7MPa, the push force increases to 563N.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X225-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.