
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X225-20-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel. With a 225 mm nominal stroke and a 20 mm adjustment range, it provides a usable 205-225 mm travel window for precise end-position calibration.
This variant includes a standard carbon steel piston rod and a -S magnet for position sensing. The dual-sided sensor grooves on the extruded aluminum barrel accept AirTAC CMSE reed and DMSE electronic switches. The rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 205-225 mm travel window during product size transitions without physically swapping out the cylinder body.
Use the rear adjuster to precisely set the retract position during commissioning, absorbing minor mechanical tolerances.
The adjustable stroke is ideal for machine setup and product changeovers, allowing you to dial in the end-stop without swapping cylinders or adding external stops. For position feedback, the -S magnet pairs directly with CMSE and DMSE sensors. This SAIJ model uses PT tapered port threading (G1/8) and supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2. The 12 mm rod and M10x1.25 thread handle moderate side loads, but for this 225 mm stroke, ensure proper external guiding to prevent binding.
Quick checklist
It operates at speeds between 30 and 800 mm/s.
The rear adjuster screw acts as a mechanical stop that lets you shorten the 225 mm nominal stroke by up to 20 mm, giving a usable travel window of 205-225 mm. It sets the end position but does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.