
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X225-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 225 mm stroke with a 30 mm adjustment range, creating a usable travel window of 195 to 225 mm.
This adjustable design allows you to fine-tune the retract end position during commissioning without swapping out the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later. The rear adjuster acts purely as a mechanical stop for deceleration and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 195-225 mm travel distance during product size changes without physically replacing the cylinder or repositioning hard stops.
Fine-tune the retract stroke at commissioning to perfect the resting position of a tooling plate, compensating for mechanical tolerance stack-up.
Adjust the stroke on the fly for diverter arms or sorting gates that need to accommodate different package sizes on a single conveyor line.
If you need less force, stepping down is not an option in this series, but stepping up to a 40 mm bore yields 628 N. The 30 mm adjustment window is ideal for product changeovers on a line, letting you dial in the exact travel distance on the fly instead of maintaining a stock of fixed-stroke SAI cylinders.
Because the stroke is 225 mm, the 12 mm carbon steel rod and M10x1.25 thread will experience some leverage under side loads; an external guide is recommended to prevent binding. This SAIJ model uses the reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. For applications that must hold a load without live air, consider the SAIL or BSAI series instead, as the SAIJ adjuster is not a lock.
Quick checklist
At the maximum 1.0 MPa pressure, it delivers up to 82 kgf.
The rear adjusting screw lets you shorten the effective stroke by up to 30 mm, giving a usable travel window of 195 to 225 mm. The adjuster acts as a mechanical stop for the retract end position and does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.