
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X225-30-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 225 mm stroke that can be fine-tuned down by up to 30 mm, creating a precise 195-225 mm usable travel window for commissioning without external stops.
This variant includes a magnet for position sensing with CMSE reed or DMSE electronic switches, uses a PT tapered port, and features a carbon steel rod. The extruded aluminum barrel incorporates sensor grooves on both sides, and the mounting set spans Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 195-225 mm travel window during product size changes without physically swapping cylinders or adding external mechanical stops.
Fine-tune the retract end position at commissioning to perfect seating pressure, absorbing minor mechanical variances via the rear 30 mm adjuster.
The adjustable stroke is ideal for product changeovers, letting you dial in the 195-225 mm window rather than swapping a fixed-stroke SAI cylinder. Because the stroke is 225 mm, ensure an external guide supports the load to prevent side-load wear on the 12 mm rod.
For an exact ISO 15552 replacement, match the 32 mm bore, 225 mm stroke, 30 mm adjustment, PT port thread, and the -S magnet requirement. Remember that the rear adjuster is a hard stop, not a lock; the SAIJ32X225-30-S will not hold a load without live air, so use a SAIL or BSAI cylinder if positive holding is required.
Quick checklist
It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the effective stroke by up to 30 mm. This provides a usable travel window of 195-225 mm. The adjuster only sets the end position; it does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.