
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-40S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X225-40-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 225 mm stroke that can be fine-tuned backward by up to 40 mm, giving you a usable travel window of 185 to 225 mm.
This variant includes a magnet for position sensing and uses a standard carbon steel piston rod with PT tapered port threads. The extruded aluminum barrel features sensor grooves on both sides, allowing you to mount either AirTAC CMSE reed or DMSE electronic solid-state switches exactly where needed. The rear adjuster acts purely as a mechanical stop to set the end position and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-40S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 185-225 mm travel window during product size transitions to set new end stops rapidly without changing the cylinder.
Use the fine rear adjustment to perfectly tune the end-of-stroke contact point for delicate 563 N press operations at 0.7 MPa.
Adjust the actuation length on the fly to accommodate different package sizes moving along a conveyor line.
Choose this 32 mm bore when an application requires precise end-position tuning during commissioning or product changeover without swapping cylinders or adding external stops. Because the 225 mm stroke exceeds 200 mm, ensure adequate external guiding to prevent excessive side-loading on the 12 mm rod. For load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead, as the SAIJ adjuster is not a lock. To match this ISO 15552 dimensionally interchangeable cylinder, specify: 32 mm bore, 225 mm stroke, 40 mm adjustment, PT port, mounting from the SAIJ set (Basic, FA, LB, TC, FTC, TCM1, TCM2), and the -S magnet option.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 40 mm. This creates a usable travel window of 185 to 225 mm, allowing you to trim the end position at commissioning without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.