
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X225-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 175 to 225 mm, allowing you to dial back the 225 mm nominal stroke by up to 50 mm during commissioning.
The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE electronic switches. It uses a PT tapered port and carbon steel rod. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reposition the end-stop to accommodate varying product lengths on a packaging line without changing the cylinder.
Dial in the exact 175 to 225 mm travel distance during commissioning to perfect the final placement of a small actuator.
Use the 50 mm rear adjustment range to tweak the retract distance for precise sensor triggering on a compact assembly fixture.
Choose this 32 mm bore if your application requires less force than the 40 mm version (which provides 879 N at 0.7 MPa) but needs a longer travel range. The 50 mm adjustment screw lets you fine-tune the retract end position on the fly without bolting on external stops or swapping out a fixed-stroke SAI cylinder.
For ISO 15552 replacement matching, verify the 32 mm bore, 225 mm stroke, 50 mm adjustment, PT port thread, and standard carbon steel rod. Note that the rear adjuster acts as a travel stop and does not hold the load without live air; for true load-holding, consider the SAIL or BSAI series.
Quick checklist
The maximum operating pressure is 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective travel from the 225 mm nominal stroke down to as little as 175 mm. This allows fine-tuning of the retract end position without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.