
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X225-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 225mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X225-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This wide window is ideal for machines that need rapid product-changeover without swapping out the actuator. Because it includes a magnet (-S), it supports AirTAC CMSE reed and DMSE electronic sensors, which ride neatly in the extruded aluminum barrel's dual sensor grooves.
Instead of relying on external stops, the built-in rear screw lets you fine-tune the retract end-position during commissioning. It is important to note that this adjuster functions purely as a travel stop and works alongside the standard variable air cushions at both ends; it does not hold the load without live air pressure. The 12mm carbon steel rod and M10x1.25 thread provide a robust interface for small-bore applications, while the mounting set covers Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X225-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly modify the retract end-stop from 150 to 225mm to accommodate different product lengths on a packaging line without changing the cylinder.
Fine-tune the exact retraction point during initial commissioning to perfect a pressing or holding operation, avoiding the need for external stopper blocks.
Adjust the stroke distance on a sorting diverter arm to handle varying package sizes on the fly, ensuring accurate routing.
Choose this 32mm bore actuator when your setup requires precise retract positioning across varying product sizes, yielding a 150-225mm usable travel window. If your application needs greater thrust, stepping up to the 40mm bore increases force to 628N at 0.5MPa. Conversely, if the load is very light, dropping to a smaller bore might suffice. The adjustable nature of this SKU means you can set the exact end-stop on the fly, a major advantage over a fixed-stroke SAI cylinder. For applications requiring the load to be physically held in place without continuous air pressure, this cylinder is not a lock; you should look at the SAIL or BSAI series, or use an external pilot-operated check valve.
When replacing an ISO 15552 cylinder, match the 32mm bore, 225mm stroke, PT tapered port thread, and the -S magnet requirement. The SAIJ series utilizes a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and intentionally omits FB, CA, CB, and CR brackets. Since the 225mm stroke is moderately long for a 32mm rod, always ensure adequate external guiding to prevent excessive side-loading on the piston rod.
Quick checklist
At the maximum pressure of 1.0 MPa, it can generate up to 82 kgf.
The rear adjuster screw allows you to shorten the effective stroke by up to 75mm, providing a usable travel window of 150-225mm. This adjuster acts as a mechanical stop to set the end position and does not function as a lock to hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.