
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X230-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X230-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 220-230 mm usable travel window, allowing you to dial back the 230 mm nominal stroke by up to 10 mm during machine setup. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This model uses a 12 mm carbon steel rod with an M10x1.25 thread, designed to handle moderate side loads. The rear adjuster acts strictly as a mechanical stop to set the end position and does not hold the load without live air pressure. For load-holding requirements without continuous air, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X230-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within a 220-230 mm window during commissioning without adding external mechanical stops.
Quickly adjust the stroke end point by up to 10 mm when switching between product sizes on a packaging line.
The adjustable stroke is ideal for product changeovers where exact end-position tuning is needed without swapping cylinders or adding external stops. This SKU is configured with PT tapered ports and no magnet.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 230 mm stroke, 10 mm adjustment range, PT port thread, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting. Since the stroke is 230 mm, ensure adequate external guiding if the load is heavy or unsupported.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the effective travel from 230 mm down to 220 mm. This stopper only sets the end position and decelerates the travel; it does not lock or hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.