
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X230-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X230-100 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 100 mm. This specific SKU provides a usable window of 130-230 mm, letting you dial in the exact retract position at commissioning without adding external stops.
The extruded aluminum barrel includes sensor grooves on both sides for mounting CMSE reed or DMSE electronic switches if needed later. It uses a PT tapered G1/8 port and relies on adjustable air cushions at both ends (27 mm cushion length) to decelerate the load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X230-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly reset the retract end-stop within the 130-230 mm window when swapping product sizes on a packaging line.
Fine-tune the final retract position during commissioning without physically swapping the cylinder or adding external spacers.
Add CMSE or DMSE switches to the dual sensor grooves to confirm the adjusted end-position in your control system.
Because the rear adjuster acts only as a mechanical stop and the air cushions manage deceleration, this cylinder cannot hold a load without live air pressure. For fail-safe load holding, consider the SAIL or BSAI series instead. To replace an ISO 15552 cylinder, match the 32 mm bore, 230 mm stroke, 100 mm adjustment, PT G1/8 port, and mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Since the 230 mm stroke is under 300 mm, side-load stress is moderate, but the 12 mm rod still requires alignment.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it generates 82 kgf of push force.
The rear adjuster screw lets you shorten the 230 mm nominal stroke by up to 100 mm, creating a usable travel window of 130-230 mm. The adjuster acts as a mechanical stop and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.