
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X230-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X230-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 230 mm stroke that can be dialed back by up to 100 mm, yielding a highly versatile 130-230 mm usable travel window for precise end-position tuning during commissioning.
This -S variant includes a magnet for position sensing and is compatible with AirTAC CMSE reed and DMSE electronic solid-state switches. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible mounting. It uses a PT tapered port thread, a 12 mm carbon steel rod, and features adjustable air cushions at both ends to decelerate moving loads smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X230-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 130-230 mm travel distance during machine commissioning to perfectly align pressing or marking heads without adding external mechanical stops.
Quickly adjust the retract position on packaging lines when switching between different carton widths, utilizing the full 100 mm adjustment range.
Leverage the built-in magnet with DMSE electronic sensors to confirm the adjusted end-position has been reached before initiating the next machine cycle.
If your process requires higher force, the neighboring 40 mm bore provides 628 N at the same pressure. The 100 mm adjustment range is ideal for machines handling multiple product sizes, allowing operators to dial in the exact 130-230 mm stroke window on the fly rather than maintaining a stockpile of fixed-stroke SAI cylinders.
Because the 230 mm stroke exceeds 300 mm only marginally, side-load risks are moderate, but an external guide is still recommended for optimal rod bearing life. Remember that the rear adjuster acts strictly as a mechanical stop; it does not hold the load without live air pressure. For true fail-safe load holding, select an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead. This unit shares the standard ISO 15552 mounting interface and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
The rear adjuster screw acts as a mechanical stop that shortens the effective stroke from the nominal 230 mm down to as little as 130 mm. This creates a 130-230 mm usable travel window, allowing precise end-position tuning at commissioning or during product changeovers without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.