
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X230-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X230-10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 220 to 230 mm, allowing you to dial back the nominal 230 mm stroke by up to 10 mm. This fine-tuning capability is ideal for product changeovers or commissioning setups where exact end-positioning is critical without swapping out the entire actuator.
The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for position detection. It supports AirTAC CMSE reed and DMSE solid-state sensors. The carbon steel rod features an M10x1.25 thread, and pneumatic connections use a PT tapered G1/8 port.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X230-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 220 to 230 mm end-stop during machine commissioning without adding external physical stops or shims to the fixture.
Quickly adapt the cylinder's effective stroke on packaging lines when handling slightly different package lengths or widths.
Fine-tune the stopping position of lightweight conveyor pallets by adjusting the rear screw up to 10 mm to align with downstream processes.
Choose this 32 mm bore adjustable-stroke cylinder when your application requires precise end-position tuning during machine commissioning or product size changes.
The SAIJ32X230-10-S is dimensionally interchangeable per ISO 15552. To match this exact replacement, specify: 32 mm bore, 230 mm stroke, 10 mm adjustment range, PT tapered port thread, and the -S magnet option. The mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Because the 230 mm stroke is relatively long for this small bore, external guide rails are recommended to prevent rod side-loading and premature seal wear.
Remember that the rear adjuster acts only as a travel stop, not a lock. The SAIJ cylinder cannot hold a load or maintain position without live air pressure. For fail-safe load holding, consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external rod lock.
Quick checklist
It operates efficiently within a speed range of 30 to 800 mm/s.
The rear adjuster screw allows you to shorten the effective stroke by up to 10 mm, creating a usable travel window of 220 to 230 mm. This stopper fine-tunes the retract end position but does not lock the load; live air pressure is required to hold position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.