
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X230-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X230-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 180 to 230 mm, allowing you to dial back the 230 mm nominal stroke by up to 50 mm during commissioning.
This 32 mm bore unit uses a PT tapered G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X230-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 180-230 mm travel window during product size transitions without physically swapping the actuator.
Dial in the exact retract position for light-duty 402 N tooling alignment without bolting on secondary external stops.
Adjust the rear stopper to softly seat delicate parts, letting the 27 mm air cushion handle the final deceleration.
Choose this 32 mm bore adjustable cylinder when you need precise end-position tuning without adding external stops. The rear adjuster acts purely as a travel stop, meaning the SAIJ32X230-50 will not hold a load without live air pressure; for fail-safe load holding, consider the SAIL or BSAI series.
For replacing an ISO 15552 cylinder, match the 32 mm bore, 230 mm stroke, 50 mm adjustment range, PT G1/8 port, and required mounting bracket. Because the stroke is 230 mm, long unsupported loads should use an external guide to prevent side-loading damage to the 12 mm rod.
Quick checklist
The maximum push force is 724 N at 0.9 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from 230 mm down to 180 mm. It only limits the stroke end position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.