
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X230-75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X230-75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This model uses a 12mm carbon steel rod with an M10x1.25 thread and a G1/8 port. The rear adjuster acts purely as a mechanical stop for end-position tuning during commissioning; it does not hold the load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series instead.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X230-75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 155-230mm travel window during format changes on packaging lines, allowing rapid size adjustments without changing the cylinder.
Fine-tune the retract stroke at commissioning to hit exact mechanical endpoints, absorbing minor machine tolerance variations.
Provide adjustable physical stops for diverter arms or gating mechanisms where the required stroke length changes between production runs.
The 75mm adjustment window is excellent for product changeovers on a line, saving the time of adding external stops. If your setup needs less force, step down to a 25mm bore; if you need more pull force, step up to a 40mm bore which provides 528N of pull force at 0.5 MPa.
Because this cylinder has a 230mm stroke, the 12mm rod requires external guidance to prevent excessive side-loading and premature seal wear. To match this ISO 15552 footprint, ensure your mounting choice from the available Basic, FA, LB, TC, FTC, TCM1, or TCM2 sets aligns with your load dynamics. This SKU uses PT tapered ports and lacks a magnet, so position sensing is not supported without modification.
Quick checklist
The rear adjuster screw lets you shorten the nominal 230mm stroke by up to 75mm, creating a usable travel window of 155-230mm. It acts as a mechanical stop to set the end position and does not lock the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.