
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X230-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X230-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. Because this SKU includes the -S magnet option, it directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves.
The integrated rear stopper allows you to trim the effective travel, creating a 155-230mm usable window from the 230mm nominal stroke. This mechanism acts solely as a travel stop to fine-tune the retract end position during commissioning; it does not lock the load or hold position without continuous live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X230-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 155-230mm travel window during format changes on a packaging line, using the rear screw to adapt retract depth for different carton heights instantly.
Fine-tune the end-of-stroke position during machine setup without fabricating custom spacer blocks or disassembling the cylinder mounting.
Leverage the built-in magnet to trigger CMSE reed or DMSE electronic sensors, confirming the adjusted retract position for the control system.
Choose this 32mm bore when an application requires precise end-position tuning on the fly, such as accommodating slight product size variations without physically swapping cylinders or adding bulky external stops. For holding a load securely without live air, a standard SAIJ is insufficient; consider an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
When replacing an ISO 15552 cylinder, match the 32mm bore, 230mm nominal stroke, 75mm adjustment range, PT G1/8 port thread, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, intentionally omitting FB, CA, CB, and CR. Since the 230mm stroke is relatively long for a 32mm bore, ensure adequate external guiding to prevent excessive side-loading on the 12mm rod thread.
Quick checklist
At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster acts as a mechanical stop that lets you shorten the 230mm nominal stroke, providing a usable travel window of 155 to 230mm. It only decelerates and sets the end position; it does not function as a lock to hold the load without air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.