
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X240-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X240-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 230 to 240 mm, allowing you to dial back the end position by up to 10 mm during machine commissioning without adding external stops.
This 32 mm bore unit uses a G1/8 port and a 12 mm carbon steel rod with an M10x1.25 thread. The rear adjuster acts strictly as a travel stop for end-position tuning, not a lock, so live air is required to hold the load. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X240-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within a 230-240 mm window during machine commissioning without swapping out the entire cylinder.
Quickly adapt the stroke end-stop by up to 10 mm on a packaging line when handling slightly different product sizes.
Fine-tune the tooling approach on an automated assembly press to compensate for mechanical wear over time.
Choose this adjustable-stroke model when you need fine end-position tuning at setup or product changeover, rather than a fixed-stroke SAI cylinder.
Because the 240 mm stroke exceeds 300 mm? No, but for any stroke over 300 mm you would need an external guide to prevent side-loading. This SAIJ32X240-10 configuration features a PT tapered port thread, no magnet, and a carbon steel rod. For load-holding without live air pressure, consider the SAIL or BSAI series instead.
Quick checklist
It can reach a maximum of 82 kgf at 1.0 MPa.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from 240 mm down to 230 mm. It is a travel stop for fine-tuning, not a lock, meaning the cylinder still requires live air to hold its position.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.