
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X240-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X240-100 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This allows precise end-position tuning at commissioning without swapping the cylinder or adding external stops. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
Fitted with a 12mm carbon steel rod and M10x1.25 thread, this 32mm bore unit operates at speeds of 30-800mm/s. The rear adjuster acts purely as a travel stop and does not hold the load without live air; for load-holding without pressure, consider the SAIL or BSAI variants. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X240-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract position within the 140-240mm window during product family swaps without changing cylinder mounts.
Fine-tune the final end position at commissioning to perfect tooling alignment, using the rear screw instead of external shims.
Adjust the stroke on packaging lines to accommodate different carton lengths on the fly, ensuring precise routing.
Choose this 32mm bore model when an application requires fine-tuning the retract distance within a 140-240mm window. The adjustable stroke is ideal for product-size changeovers on a line, whereas a fixed SAI cylinder locks you into one exact dimension. Because the total stroke is 240mm, ensure adequate external guidance to prevent excessive side-loading on the rod.
To match this ISO 15552 cylinder for a replacement, verify the 32mm bore, 240mm nominal stroke, 100mm adjustment range, PT tapered port threads, and the specific mounting accessory. This base configuration lacks a magnet, so it does not support CMSE or DMSE sensors without specifying the -S option.
Quick checklist
At 0.7MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the effective travel by up to 100mm. This creates a usable stroke window of 140mm to 240mm from the nominal 240mm stroke, enabling precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.