
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X240-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X240-100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a generous 140-240 mm usable travel window, allowing you to dial back the 240 mm nominal stroke by up to 100 mm during commissioning. This built-in adjustability eliminates the need to swap cylinders or bolt on external stops when tuning end positions.
This variant includes a magnet for position sensing and uses a carbon steel piston rod with an M10x1.25 thread. The extruded aluminum barrel incorporates sensor grooves on both sides, compatible with AirTAC CMSE reed and DMSE electronic solid-state switches. It features PT tapered port threads (G1/8) and adjustable air cushions at both ends to decelerate the moving load smoothly.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X240-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 140-240 mm travel window during setup to dial in exact retract positions without machining external stoppers.
Quickly adjust the end-stop on packaging lines when handling different carton sizes, leveraging the 100 mm adjustment range.
Choose this 32 mm bore unit when you need precise retract-end tuning without changing the cylinder, stepping up from a smaller bore if 402 N at 0.5 MPa is insufficient. The rear adjuster acts solely as a travel stop and the air cushion only decelerates the load; neither will hold a load without live air pressure. For true load-holding, consider the SAIL or BSAI series, or an external rod lock.
To match this ISO 15552 cylinder for a retrofit, specify a 32 mm bore, 240 mm stroke with a 100 mm adjustment range, PT G1/8 ports, and a magnet (-S). Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets. Because the 240 mm stroke is substantial for a 32 mm bore, use an external guide to prevent excessive side-loading on the 12 mm rod.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw lets you shorten the 240 mm nominal stroke by up to 100 mm, creating a 140-240 mm usable travel window. It acts as a mechanical stop to fine-tune the retract position and does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.