
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X240-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X240-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 230-240 mm usable travel window, allowing you to dial back the 240 mm nominal stroke by up to 10 mm.
This variant includes a standard carbon steel piston rod and a magnet for CMSE reed or DMSE solid-state sensors. The extruded aluminum barrel integrates sensor grooves on both sides, and the rear adjuster serves strictly as a mechanical stop for end-position tuning, not a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X240-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly fine-tune the 230-240 mm travel window during product size transitions without swapping the cylinder or adding external stopper blocks.
Dial in the exact retract position during initial commissioning using the 10 mm rear adjustment screw on this double-acting actuator.
Adjust the actuation point on sorting gates by up to 10 mm to perfectly time the routing of packages on a conveyor line.
Choose this adjustable model when your assembly requires precise end-position tuning during commissioning without adding external stops. If your application needs less force, stepping down is not an option in this series, but if you need more thrust, the 40 mm bore offers 628 N at 0.5 MPa. Since the total stroke is 240 mm, the 12 mm carbon steel rod with an M10x1.25 thread handles moderate side loads, but an external guide is recommended for heavy lateral forces.
This SKU uses PT (tapered) port threads and includes a magnet for position sensing. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. The rear adjuster and air cushions do not hold loads without live air; for secure load holding, consider the SAIL or BSAI series instead.
Quick checklist
The rear adjuster allows you to shorten the effective stroke by up to 10 mm, creating a 230-240 mm usable travel window. It acts as a mechanical stop to fine-tune the end position without changing the cylinder itself.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.