
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X240-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X240-20 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 220 to 240 mm, allowing you to dial back the nominal 240 mm stroke by up to 20 mm during commissioning.
This extruded aluminum barrel unit omits the FB, CA, CB, and CR mounts, offering the reduced SAIJ mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The standard carbon steel rod uses an M10x1.25 thread, while the PT tapered port ensures a tight pneumatic connection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X240-20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Fine-tune the 220-240 mm travel window during initial commissioning to perfectly dial in the end-of-stroke position without swapping cylinders.
Quickly adjust the rear stopper by up to 20 mm to accommodate slight variations in product dimensions on a packaging line.
Select the SAIJ adjustable version over a fixed SAI when you need a variable end-stop for product changeovers without adding external stops. To replace an ISO 15552 cylinder, match the 240 mm stroke, 20 mm adjustment, PT port, and mounting interface.
Because the stroke is 240 mm, ensure adequate guidance to prevent rod side-loading. Note that the rear adjuster acts only as a travel stop and does not hold the load without live air; for dead-stop holding, consider an external rod lock or the SAIL series.
Quick checklist
It features a rear adjusting screw that lets you shorten the effective travel from 240 mm down to 220 mm. This creates a 20 mm tuning window to fine-tune the retract end position without external stops.
The maximum thrust is 82 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.