
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X240-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X240-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 240 mm stroke that can be fine-tuned backward by up to 30 mm, creating a usable travel window of 210-240 mm. This built-in adjuster allows you to dial in exact end positions at commissioning without adding external stops.
Equipped with a standard magnet (-S), it supports AirTAC CMSE reed and DMSE electronic sensors via the dual-side sensor grooves on its extruded aluminum barrel. The carbon steel piston rod features an M10x1.25 thread, and the cylinder includes adjustable air cushions at both ends. Remember that the rear adjuster acts only as a travel stop; it does not lock the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X240-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 210-240 mm end position during product size transitions without swapping cylinders or adding external mechanical stops.
Fine-tune the retract end-position during initial setup to compensate for mechanical tolerances in your fixture or tooling.
Adjust the clamping reach on the fly for different material thicknesses, using the rear screw to set the precise 30 mm trim window.
The adjustable stroke is ideal for machine changeovers where product sizes vary, replacing the need to swap out a fixed-stroke SAI cylinder. For true load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead. This SAIJ variant supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
The rear adjuster screw lets you shorten the effective travel from the 240 mm nominal stroke down to as little as 210 mm. This stopper only sets the end position; it does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.