
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X240-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 240mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X240-50 is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a 240mm nominal stroke that can be dialed back by up to 50mm, providing a precise 190-240mm usable travel window for fine-tuning end positions during machine commissioning.
The rear adjustment screw acts as a mechanical stop to set the retract end position without adding external stops or swapping the cylinder. It uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options. The extruded aluminum barrel includes sensor grooves on both sides, compatible with AirTAC CMSE reed and DMSE electronic switches when a magnet is specified.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X240-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 190-240mm travel window during product size changeovers to set new retract stops without physically swapping cylinders.
Adjust the rear stop on the fly to accommodate packages of varying lengths on a sorting line without repositioning the cylinder.
Trim the effective stroke by up to 50mm during setup to perfectly time the end-of-travel position without adding external mechanical stops.
Choose this 32mm bore when an application requires precise end-position tuning on the fly, such as adapting to slightly varying product sizes on a conveyor. The 12mm rod and M10x1.25 thread handle moderate side loads, but because the stroke is 240mm, an external guide is recommended for heavy or off-center loads to prevent rod binding.
The rear adjuster and integrated air cushions only decelerate the travel end; they do not hold the load without live air pressure. For true fail-safe load holding, consider the SAIL pneumatic lock series, the BSAI clamp-lock cylinder, or an external rod lock. To match this ISO 15552 footprint, specify a 32mm bore, 240mm stroke, 50mm adjustment, PT tapered ports, and the desired mounting style.
Quick checklist
At the maximum operating pressure of 1.0 MPa, it delivers up to 82 kgf.
The rear adjuster screw lets you shorten the 240mm nominal stroke by up to 50mm, creating a 190-240mm usable travel window. The adjuster acts as a travel stop for end-position tuning and does not hold the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.